Industrial Products Distributor Serving Rochester, Buffalo, Syracuse & albany New YorkDistributor of Components & Systems
for All Your Process, Industrial, Pharmaceutical/Sanitary,
Power Generation, HVAC/Boiler and Water Treatment Needs
Products DistributedTemperature ProductsIndustrial Pressure ProductsIndustrial Valve ProductsIndustrial Filter and Strainer ProductsIndustrial Fitting Products Level Control ProductsHeat Trace ProductsFlow Sensors, Switches & MetersIndustrial Pump ProductsSolenoid ValvesSteam ProductsControllers & RecordersIndustrial Filtration ProductsLED Lighting   Manufacturers

ABZ ValvesAmetekAsahiAshcroftBee ValveBindicatorBurkertChemlineControl AirDk Lok Flo-TiteFoxboroGems/Warrick Grundfos HeadlineHydroFLOWKoboldNelsonRCM FlowRuBSensorTecSharpeShurjointTitan Flow ControlVersa-MaticWatson McDaniel West/Partlow, Cal & PMA

TwitterGoogle Plus
Printable PagePrintable Page Email This PageEmail This Page

Supplier & Distributor of Flow Meters, Switches & Sensors Products

Flow Meter
Flow Meter
  Flow Meter
Flow Meter
  Flow Meter
Flow Meter

When it comes to generation, transmission, and industrial power measurement, Temp-Press, an industrial parts distributor, partners with trusted manufacturers to bring you only the most precise and accurate devices. With AMTEK® power instrument's JEMSTAR-a high-accuracy revenue meter-you'll enjoy ease of use coupled with advanced communication options, and a guaranteed reading accuracy of 0.07% for watt-hours. Just a small change in percentage can cost you big, so Temp-Press carries top-of-the-line flow meter products to keep you up and running. For more information about AMTEK®'s JEMSTAR High Accuracy Revenue Meter, please contact Temp-Press today.

Gems SENSORS  |  GEMS SWITCHES  |  Ametek Meters



new ashcroft switches

DDS-Series Differential Pressure Switch
with Diaphragm Sensing Element


Installation and Maintenance Instructions
(for DDS-Series High Static Operating Pressure
IWD Range Differential Pressure Switches)

DDS Series High Static IWD Range
Differential Pressure Switches

KOBOLD FLOWMETERS AND SWITCHES

rcm flow products

Chemline flow meter

Gems SENSORS

RFA FLOW

  • Body Brass, 316 Stainless Steel or Polypropylene (Hydrolytically Stable, Glass Reinforced)
  • Rotor Pin Ceramic
  • Rotor PPS Composite, Black1
  • Lens Polysulfone
  • O-Ring Viton® (Alloy Bodies); Buna N (Polypropylene Body)
  • Low Flow Adaptor Glass Reinforced Polypropylene
  • Brass or Stainless Steel Body 200 PSIG (13.8 bar) @ 70ºF (21ºC), 100 PSIG (6.9 bar) @ 212ºF (100ºC)2
  • Polypropylene Body 100 PSIG (6.9 bar) @ 70ºF (21ºC), 40 PSI (2.8 bar) Max. @ 180ºF (82ºC)
  • Brass or Stainless Steel Body -20ºF to 212ºF (-29ºC to 100ºC)
  • Polypropylene Body -20ºF to 180ºF (-29ºC to 82ºC)
  • Electronics 150ºF (65ºC) Ambient
  • Viscosity, Maximum 200 SSU
  • Input Power 24 VDC, ±10%
  • Output Signal 0-10 VDC Analog Signal @ 1mA, Max.
  • Current Consumption 25 mA, Max.
  • Current Source Output, Max.10 mA
  • Accuracy See Table Below
  • Electrical Termination 22 AWG PVC-Jacketed, 24˝ Cable. Color Coded: Red = +VDC; Black = Ground; White = Signal Output

RFS FLOW

  • Body Brass, 316 Stainless Steel or Polypropylene (Hydrolytically Stable, Glass Reinforced)
  • Rotor Pin Ceramic
  • Rotor PPS Composite, Black
  • Lens Polysulfone
  • O-Ring Viton® (Alloy Bodies); Buna N (Polypropylene Body)
  • Low Flow Adaptor Glass Reinforced Polypropylene
  • Operating Pressure, Maximum
  • Brass or Stainless Steel Body 200 PSIG (13.8 bar) @ 70°F (21°C),
  • Polypropylene Body 100 PSIG (6.9 bar) @ 70°F (21°C),
  • Brass or Stainless Steel Body -20°F to 212°F (-29°C to 100°C)
  • Polypropylene Body -20°F to 180°F (-29°C to 82°C)
  • Electronics 150°F (65°C) Ambient
  • Viscosity, Maximum 200 SSU
  • Input Power 24 VDC or 115 VAC
  • Relay Contact Ratings (SPDT) 1 Amp, 24 VDC Resistive; 0.3 Amp, 110 VAC
  • Current Consumption No Load Load (Relay Energized)
  • 24 VDC 20mA 35mA
  • 115 VAC 45mA 95mA
  • Repeatability 2% Maximum Deviation
  • Set Point Accuracy (Factory Set) ± 5%
  • Set Point Differential 15% Maximum
  • Electrical Termination 20 AWG PVC-Jacketed, 24˝ Cable. Color Codes: Red = +VAC/VDC, Black = Ground, White = N.O. Contact, Brown = N.C. Contact, Green = Common
 

RFO FLOW

  • Body Brass, 316 Stainless Steel or Polypropylene (Hydrolytically Stable, Glass Reinforced)
  • Rotor Pin Ceramic
  • Rotor PPS Composite, Black
  • Lens Polysulfone
  • O-Ring Viton® (Alloy Bodies); Buna N (Polypropylene Body)
  • Low Flow Adaptor Glass Reinforced Polypropylene
  • Brass or Stainless Steel Body 200 PSIG (13.8 bar) @ 70°F (21°C),
  • Polypropylene Body 100 PSIG (6.9 bar) @ 70°F (21°C),
  • Brass or Stainless Steel Body -20°F to 212°F (-29°C to 100°C)
  • Polypropylene Body -20°F to 180°F (-29°C to 82°C)
  • Electronics 150°F (65°C) Ambient
  • Viscosity, Maximum 200 SSU
  • Input Power 24 VDC or 115 VAC
  • Relay Contact Ratings (SPDT) 1 Amp, 24 VDC Resistive; 0.3 Amp, 110 VAC
  • Current Consumption No Load Load (Relay Energized)
  • 24 VDC 20mA 35mA
  • 115 VAC 45mA 95mA
  • Repeatability 2% Maximum Deviation
  • Set Point Accuracy (Factory Set) ± 5%
  • Set Point Differential 15% Maximum
  • Electrical Termination 20 AWG PVC-Jacketed, 24˝ Cable. Color Codes: Red = +VAC/VDC, Black = Ground, White = N.O. Contact, Brown = N.C. Contact, Green = Common
 

RFI FLOW

  • Body Brass, 316 Stainless Steel or Polypropylene (Hydrolytically Stable, Glass Reinforced)
  • Rotor Pin Ceramic
  • Rotor High Visibility Orange, Molded Nylon
  • Lens Polysulfone
  • O-Ring Viton® (Brass Body); Buna N (Polypropylene Body)
  • Low Flow Adaptor Glass Reinforced Polypropylene
  • Brass or Stainless Steel Body 100 PSIG (7 bar) @212°F (100°C) 200 PSIG (13.8 bar) Max. @ 70°F (21°C)
  • Polypropylene Body 100 PSIG (6.9 bar) at 70°F (21°C), 40 PSI (2.8 bar) Max. @ 180°F (82°C)
  • Brass or Stainless Steel Body -20°F to 212°F (-29°C to 100°C)
  • Polypropylene Body -20°F to 180°F (-29°C to 82°C)

GEMS SWITCHES

FS-4 SWITCH

  • Housing and Piston Ryton® R4
  • Spring 316 Stainless Steel
  • O-Ring Viton®
  • Other Wetted Parts Epoxy
  • Operating Pressure, Maximum 250 PSIG (17.2 bar) @ 70ºF (21ºC)
  • Operating Temperature 0ºF to 225ºF (-17ºC to +107ºC)
  • Set Point Accuracy ±15% Maximum
  • Set Point Differential 20% Maximum
  • Switch* SPST or SPDT, 20 VA (SPDT: 240 VAC Max.)
  • Inlet/Outlet Ports 9/16" -18 UNF-2B Thread
  • Recommended Filtration 50 Microns or Better
  • Electrical Termination
  • SPST 18 AWG, Zipcord, 24" Long
  • SPDT 18 AWG, PVC 24" Long Leads

FS-150

  • FS-150 Series - Straight Flow Path with Low Pressure Drop
  • Housing Polypropylene, Hydrolytically Stable, Glass Reinforced
  • Piston Ryton® - R4, 316 Stainless Steel
  • O-Ring Viton®
  • Spring 316 Stainless Steel
  • Operating Pressure, Maximum 200 PSIG (13.8 bar) @+70ºF to +150ºF (+21.1ºC to 65.5ºC) 150 PSIG (10.3 bar) @+150ºF to +212ºF (+65.5ºC to +100ºC)
  • Operating Temperature 0ºF to 212ºF (-17.8ºC to +100ºC)
  • Set Point Accuracy ±15%
  • Set Point Differential 20% Maximum
  • Switch* SPST, 20 VA
  • Inlet/Outlet Ports 1/2" NPT Male
  • Electrical Termination 1/4" Male Quick Connect Terminals (2)

FS-200

  • FS-200 Series - General Purpose,Straight-Through Flow Path
  • FS-200 Bronze or 316 Stainless Steel
  • FS-200 Adjustable Bronze
  • Shuttle Teflon®
  • Bonnet Bronze or Stainless Steel
  • Spring 316 Stainless Steel
  • Other Wetted Parts Viton®, Ceramic
  • Operating 400 PSIG (27.6 bar) @ 100ºF (37.8ºC)
  • Proof 800 PSIG (55.2 bar) @ 100ºF (37.8ºC)
  • FS-200 -20ºF to +300ºF (-29ºC to +148.9ºC)
  • FS-200 Adjustable -20ºF to +200ºF (-29ºC to +93.3ºC)
  • Repeatability 1% Maximum Deviation
  • Set Point Accuracy ±10%
  • Set Point Differential 15% Maximum
  • Switch* SPDT, 20 VA
  • Electrical Termination No. 18 AWG, 24" L., Polymeric Lead Wires Red NC, Black Common, Orange NO

FS-380 SWITCH

  • FS-380 Series - Compact Flow Switchfor High Inline Pressures
  • Housing Brass or 316 Stainless Steel
  • Piston PPS Composite, Epoxy
  • Spring 316 Stainless Steel
  • O-Ring Fluorocarbon
  • Operating Pressure, Maximum 1500 PSI (107 bar)
  • Operating Temperature -20ºF to +275ºF (-28.8ºC to +135ºC)
  • Set Point Accuracy ±20% Maximum
  • Set Point Differential 20% Maximum
  • Switch* SPST, 20VA, N.O. at no Flow
  • Electrical Termination No. 22 AWG, 24" to 26" Polymeric leads

FS-400 SWITCH

  • FS-400 Series -General Purpose, 90º Flow Path
  • Housing Bronze
  • Shuttle Delrin®
  • Spring 316 Stainless Steel
  • O-Ring Viton®
  • Other Wetted Parts Ceramic
  • Pressure Rating, Maximum
  • Operating 400 PSI (27.6 bar) @ 100ºF (+37.8ºC)
  • Proof 800 PSI (55.2 bar) @ 100ºF (+37.8ºC)
  • Operating Temperature -20ºF to +180ºF (-29ºC to +82.2ºC)
  • Repeatability 1% Maximum Deviation
  • Set Point Accuracy ±10%
  • Set Point Differential 15% Maximum
  • Switch* SPDT, 20 VA
  • Inlet/Outlet Ports 3/4" NPT
  • Electrical Termination No. 18 AWG, 24" L., Polymeric Lead Wires
 

FS-480 SWITCH

  • FS-480 Series - Stainless Steel Flow Switch for Large Flow, Low Pressure Drop
  • Housing/End Fitting 316 Stainless Steel
  • Piston PPS, Epoxy
  • Spring 316 Stainless Steel
  • O-Ring Fluorocarbon
  • Operating Pressure, Maximum 1000 PSI (69 bar)
  • Operating Temperature -20ºF to +250ºF (-28.8ºC to +121ºC)
  • Set Point Accuracy ±20% Maximum
  • Set Point Differential 20% Maximum
  • Recommended Filtration 100 Micron or better
  • Switch* SPST, 20VA, 120/240 VAC, N.O. at no Flow
  • Electrical Termination No. 22 AWG, 24" PVC Cable

FS-500

  • FS-500 Series - Low Cost Units for Threaded Plastic Piping
  • Housing, Bonnet, Shuttle, Shuttle Cap Polypropylene, Hydrolytically Stable
  • O-Ring Viton® or Buna N
  • Spring 316 Stainless Steel
  • Retaining Clip PH 15-7 Mo Stainless Steel
  • Operating Pressure, Maximum 100 PSIG (6.9 bar) @ +70ºF (21ºC)
  • 50 PSIG (3.4 bar) @ +180ºF (82ºC)
  • 40 PSIG (2.8 bar) @ + 212ºF (100ºC)
  • Operating Temperature, Maximum 0º to 212ºF (100ºC)
  • Set Point Accuracy ± 20%
  • Set Point Differential ± 20% Maximum
  • Switch** SPST, N.O. Pilot Duty 20 VA, 120-240 VAC or VDC
  • J-Box with 5A Relay
  • Coil 120 VAC 50/60 Hz
  • Contacts SPDT 5A - 240 VAC Res, 1/3 HP - 120 VAC, 5A - 28 VDC Res.
  • Inlet/Outlet Ports 3/4" Female NPT
  • Electric Termination
  • Pilot No. 22 AWG, 24" Zip Cord Lead Wires
  • J-Box 6´ PVC Cable

FS-550

  • FS-550 Series - High Pressure, Metal Paddle Switch
  • Housing Brass or 316 Stainless Steel
  • Paddle 302 Stainless Steel
  • Spring 316 Stainless Steel
  • Other Wetted Parts Ceramic and Teflon®
  • Operating Pressure, Maximum 2000 PSIG (138 bar)
  • Pressure Drop 3 PSIG (0.2 bar) Maximum
  • Operating Temperature -30ºF to + 300ºF (-34.4ºC to + 148.9ºC)
  • Set Point Accuracy ± 25%
  • Switch* SPDT, 20 VA
  • Repeatability ± 5%
  • Electrical Termination No. 18 AWG, 24" L., Polymeric Lead Wires

FS-600

  • FS-600 Series - No Moving Part, Thermal Dispersion Flow Switch
  • Probe 303 Stainless Steel
  • Flow Body 316 Stainless Steel
  • Operating Pressure (Max.) 363 PSIG (25 bar)
  • Operating Temperature -14º F to 140ºF (-10ºC to 60ºC)
  • Power on Delay Time 15 Seconds Max (Output On)
  • Response Time 10 Seconds Max.
  • Inlet/Outlet Ports 1/2", 3/4", 1", 1-1/2" NPT 1/2", 3/4", 1", 1-1/2" G Internal
  • Operating Voltage 24 Vdc or 24Vac +/- 15%
  • Current Consumption Less than 50mA
  • Switch Contact Rating 30Vac@45mA, 42Vdc @65mA
  • Switch Logic Normally Open
  • Ingress Protection IP65
  • Set point Accuracy 15%
  • Set point Differential 20% (Max.)
  • Electrical Termination M12 x 1 (4-Pin) (1 meter cable included)
  • Approvals CE
 

FS-925 Series - General Purpose

  • Flow Rate Settings: Liquids: 0.1 GPM to 1.5 GPM
  • Air/Gases: See Flow Settings at right

FS-926 Series - Low Flow

  • Port Size: 1/4" NPT
  • Primary Construction Material: Brass or Stainless Steel
  • Setting Type: Fixed
  • Flow Rate Settings: Liquids: 50-300 cc/min.
  • Housing Brass or 316 Stainless Steel
  • Piston
  • In Brass Housing Polysulfone for water; Brass for oil or air
  • Stainless Steel Housing 316 Stainless Steel
  • Low Flow Piston (FS-926) Same as Housing
  • Spring 316 Stainless Steel
  • O-Ring Viton®
  • Other Wetted Parts Epoxy
  • Pressure Rating
  • Operating, Maximum 1000 PSIG (69 bar)
  • Proof 2500 PSIG (172 bar)
  • Burst 5000 PSIG (345 bar)
  • Operating Temperature
  • With Brass or S.S. Piston -20ºF to +300ºF (-29ºC to +148.9ºC)
  • With Polysulfone Piston -20ºF to +225ºF (-29ºC to +107.2ºC)
  • Repeatability 1% Maximum Deviation
  • Set Point Accuracy ±10%
  • Set Point Differential 15% Maximum
  • Switch* SPDT, 20 VA
  • Inlet/Outlet Ports 1/4" NPT
  • Electrical Termination No. 18 AWG, 24" L., Polymeric Lead Wires

FS-927

  • FS-927 Series - Small Designfor Tight Instrumentation Packages
  • Housing and Piston Brass, Stainless Steel
  • Spring 316 Stainless Steel
  • Other Wetted Parts Stainless Steel
  • Operating Pressure, Maximum 1000 PSIG (69 bar)
  • Operating Temperature -20ºF to +200ºF (-29ºC to +93.3ºC)
  • Set Point Accuracy ±15%
  • Set Point Differential 20% Maximum
  • Switch* SPST, 20 VA
  • Inlet/Outlet Ports 1/4" NPT
  • Electrical Termination No. 18 AWG, 24" L., PVC Lead Wires

FS-930

  • FS-930 Series - Oil Flow Switch,Compensates For Viscosity Change In Fluids
  • Housing Brass
  • Piston Brass
  • Spring 316 Stainless Steel
  • O-Ring Viton®
  • Other Wetted Parts Epoxy
  • Operating, Maximum 1000 PSIG (69 bar)
  • Proof 2500 PSIG (172 bar)
  • Burst 5000 PSIG (345 bar)
  • Operating Temperature -20ºF to + 300ºF (-29ºC to +148.9ºC)
  • Repeatability 1% Maximum Deviation**
  • Set Point Accuracy ±10%
  • Set Point Differential 15% Maximum
  • Switch* SPDT, 20 VA
  • Inlet/Outlet Ports 1/4" NPT
  • Electrical Termination No. 18 AWG, 24" L., Polymeric Lead Wires
  • Explosion-Proof Approvals U.L. Approved for Class I, Division 2, Groups A, B,
  • U.L. Approved — File No. E183854

FS-10798

  • FS-10798 Series - Externally Adjustable forWater, Oils and Gases
  • Housing Brass or 316 Stainless Steel
  • Piston
  • In Brass Housing Polysulfone for water; Brass for oil or air
  • In Stainless Steel Housing 316 Stainless Steel Only
  • Spring 316 Stainless Steel
  • O-Ring Viton®
  • Other Wetted Parts Epoxy
  • Pressure Rating
  • Operating 1000 PSIG (69 bar)
  • Proof 2500 PSIG (172 bar)
  • Burst 5000 PSIG (345 bar)
  • Operating Temperature
  • With Brass or S.S. Piston -20ºF to +300ºF (-29ºC to +148.9ºC)
  • With Polysulfone Piston -20ºF to +225ºF (-29ºC to +107.2ºC)
  • Repeatability 1% Maximum Deviation
  • Set Point Accuracy ±10% Maximum
  • Set Point Differential 15% Maximum
  • Switch* SPDT, 20 VA
  • Inlet/Outlet Ports 1/2" NPT
  • Electrical Termination No. 18 AWG, 24" L., Polymeric Lead Wires

Sensors and Fittings

 DS8032                                                                                                                        

  • Indication, monitoring, transmitting and On/Off control in one device
  • Programmable outputs (Transitor or relay)
  • Automatic-calibration: TEACH-IN
  • Communication-external setpoints and/or process value (4-20 mA) or AS-interface

 

DS8035

  • Flow measurement for liquids with low solid content
  • Flow indication including 2 totalizers
  • Available as compact version, or for control cabinet or remote mounting
  • Batching unit with 3 different dosing modes (local, binary input, time proportional)

 

DS8205 Controller

  • Flat glass probe featuring self cleaning and abrasion-free operation
  • Freely programmable PID controller functions for reasy pH-control systems solutions
  • Remote version with separated controller away from the sensor
  • Commissioning is easy due to multi-language, menu-guided operation
  • For use in both pipes and takes using custom fittings or submersion kits

 

DS8205 Transmitter

  • Flat glass probe featuring self cleaning and abrasion-free operation
  • Programmable pH-transmitter functions for easy pH-measuring
  • Remote version with separated transmitter away from the sensor
  • Commissioning is easy due to multi-language, menu-guided operation
  • For use in both pipes and tanks installed in custom fittings or submersion kits

 

DSS030

  • Pipe diameters 1/4" (DN 6) to 2 1/2" (DN 65)
  • Closed pipe system, i.e. sensor inside fitting
  • Quarter-turn technology
  • Electronics available for Indication, Monitoring, Transmitting, On/Off control, Batch control

Ametek Meters

JEMSTAR High Accuracy Revenue Meter for Generation, Transmission, and Industrial Power Measurement

Easy to Use

  • JEMWARE configuration wizard
  • On-line help system
  • Menu-driven graphical display
  • Site verification tools

High Accuracy

  • 0.07% of reading for watt-hours
  • Simultaneous uncompensated and compensated (TLC, LLC) measurements
  • Selectable PT/CT gain error correction
 

Versatile

  • Power quality, totalization
  • Digital inputs/outputs, analog outputs
  • Wide, auto-ranging input (55-530 VAC)

Advanced Communication Options

  • Internal modem
  • Single, Dual RS-232/485 (selectable)
  • Modem and RS-232/485
  • Ethernet and RS-232/485
  • Web Browser display of measurements and alarms 

     


Request Quoteback to top


Copyright © 2012 Temp Press All Rights Reserved     Site created by ThomasNet Web Solutions